research

研究

2025

54.
53.

2024

52.
51.

2023

50.
49.
48.
47.
46.
45. Chin-Lung Chang, Yi-Hong Cheng, H. K. Lin*, “Optimization and characterization of T joint laser welds for aluminum fin heat sink with copper base”, The International Journal of Advanced Manufacturing Technology, 124, 2023, 2323-2333. (SCI)

2022

44.Yi-Cin Ciou, Chin-Lung Chang, Wei-Hua Lu, H. K. Lin*, “ Mechanical and microstructural properties of dissimilar copper and stainless-steel butt welds prepared using zigzag and circular fiber laser oscillation methods”, Materials Science and Engineering A 859, 2022, 144178. (SCI)
43.H. K. Lin*, Yi-Hong Cheng, Guan-Yuan Li, Ying-Chi Chen, Piotr Bazarnik, Jessica Muzy, Yi Huang* and Terence G. Langdon, ” Study on the surface modification of nanostructured Ti alloys and coarse-grained Ti alloy”. Metals, 12, 2022, 948. (SCI)
42.
 
 
41.
 
 

2021

40. H. K. Lin*, J. J. Wang, W. H. Lu, W. S. Chuang*, C. Y. Chen, H. S. Chou and J. C. Huang, “Microstructure and optical properties of AgCuAl medium entropy films with nanoparticles induced by pulsed-laser dewetting”, Surface & Coatings Technology, 421, 2021, 127427. (SCI)
39. H. K. Lin*, C. W. Huang, Y. H. Lin, W. S. Chuang* and J. C. Huang, “Effects of accumulated energy on nanoparticle formation in pulsed-laser dewetting of AgCu thin films”. Nanoscale Research Letters, 2021, 16:110. (SCI)
38. C.T. Pang, C. H. Lin, Y. K. Huang, Jason S. C. Jang, H. K. Lin, C. N. Kuo, D. Y. Lin and J. C. Huang, “Design of Customize Interbody Fusion Cages of Ti64ELI with Gradient Porosity by Selective Laser Melting Process”, Micromachines, 12(3), 2021, 307. (SCI)
 

2020

37.

 Y. H. Lin, J.J. Wang, Y.T. Wang, H. K. Lin* and Y.J. Lin, “Antifungal Properties of Pure Silver Films with Nanoparticles Induced by Pulsed-Laser Dewetting Process”, APPLIED SCIENCES-BASEL, 10, 2020, 2260. (SCI)

36.

 Y. J. Lin, H. K. Lin, and Y. H. Lin, “Construction of Raman spectroscopic fingerprints for the detection of Fusarium wilt of banana in Taiwan”, PLOS ONE, 2020, 20-31. (SCI)

35.

 H. K. Lin*, H. A. Chen, U. G. Huang, C. M. Chang and J. C. Huang, “Effects of Mg content and thermal treatments on optoelectronic and bending properties of transparent conductive indium tin oxide/AgMg bi-layer film”, Thin Solid Films, 697, 2020, 137842. (SCI)

34.

 H. K. Lin*, Y. T. Wang, W. S. Chuang, H. S. Chou and J. C. Huang, “Surface resonance properties of pure Cu and Cu80Zr20 metallic glass films with nanoparticles induced by pulsed-laser dewetting process”, Applied Surface Science, 507, 2020, 145185. (SCI)

2019

33.

 H. K. Lin*, Y. J. Huang, W. C. Shih, Y. C. Chen, and W. T. Chang,“Crystalline characteristics of annealed AlN films by pulsed laser treatment for solidly mounted resonator applications”, Chemistry Central Journal (BMC Chemistry), 2019, 13:30. (SCI)

32.

 H. K. Lin*, G. Y. Li, S. Mortier, P. Bazarnik, Y. Huang, M. Lewandowska,and T. G. Langdon, “Processing of CP-Ti by high-pressure torsion and the effect of surface modification using a post-HPT laser treatment”, Journal of Alloys and Compounds, 784, 2019, 653-659. (SCI)

31.

 C. M. Chang, H. K. Lin*, U. G. Huang, H. A. Chen and J. C. Huang, “Effects of different annealing processes on optoelectronic and bending fatigue properties of AgZr and ITO/AgZr thin film metallic glass”, Optics and Lasers in Engineering, 115, 2019, 100-106. (SCI)

30.

2018

29.

 H. K. Lin*, S. Z. Hong, “Effects of Mg content and annealing treatment on optical and electrical properties of CuMg and ITO/CuMg metallic glass films”, Journal of Alloys and Compounds, 731, 2018, 248-252. (SCI)

2017

28.

 S. Chen, J. Huang, C. Pan, C. Lin, T. Yang, Y. Huang, et al., “Microstructure and mechanical properties of open-cell porous Ti-6Al-4V fabricated by selective laser melting,” Journal of Alloys and Compounds, 2017, vol. 713, pp. 248-254.(SCI)

27.

 H. K. Lin*, U. G. Huang, S. Z. Hong, “Effect of laser parameters on optoelectronic properties of polycrystalline silicon films prepared by two-step annealing process”, The International Journal of Advanced Manufacturing Technology, 2017, 1-5. (SCI)

26.

 C. T. Pan, C. H. Lin, Y. S. Huang, T. L. Yang, S. Y. Chen, C. H. Ou, L. Y. Chen, J. C. Huang, J. S. C. Jang, H. K. Lin, and D. Y. Lin, “Design of Interbody Fusion Cages of Ti6Al4V with Gradient Porosity Using a Selective Laser Melting Process for Spinal Fusion Arthroplasty” Journal of Laser Micro/Nanoengineering, 12, 2017, 34-44. (SCI)

25.

 H. K. Lin*,S. Hong, B. Chung, and R. Lin , “ Characterization of local laser bonding quartz to anodic aluminum oxide in light emission device,” Optical and Quantum Electronics,vol. 49, p. 7, 2017. (SCI)

24.

 L. Y. Chen, J. C. Huang, C. H. Lin, C. T. Pan, S. Y. Chen, T. L. Yang, D. Y. Lin, H. K. Lin, J. S. C. Jang, “Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting”, Mater. Sci. Eng. A, vol. A682, 2017, pp. 389-395. (SCI)

2016

23.

 H. K. Lin*, C. S. Chang, and C. H. Chiu, “Properties of ITO films deposited on cholesteric liquid crystal layer by two-step DC magnetron sputtering”, Optical and Quantum Electronics, 48:496, 2016,1-8. (SCI)

22.

 T. F. Hong, L. M. Fu, B. S. Wu , K. Y. Lin , H. K. Lin , T. Y. Kuo , “Biomimetic Coatings on Fiber Laser Modified Ti-6Al-4V Surfaces”, Journal of Laser Micro/Nanoengineering, 11, 2016, 147-152. (SCI)

21.

 H. K. Lin*, W. C. Hsu, L. C. Tsao , “ Selective electrode patterning of ITO films using pulsed ultraviolet laser”, Optical and Quantum Electronics, 48:90, 2016, 1-11. (SCI)

20.

 C. C. Cheng , R. C. Lini , H. K. Lin *, K. S. Kao , Y. C. Chen , “ Frequency Modulation and Device Repaired by Laser Treatment in Film Bulk Acoustic Filters”, Journal of Laser Micro/Nanoengineering, 11, 2016, 13-16. (SCI)

2015

19.

 H. K. Lin*, K. C. Cheng and J. C. Huang, “Effects of Laser Annealing Parameters on Optical and Electrical Properties of ITO/Metallic Glass Alloy Bi-layer Films” .Nanoscale Research Letters.2015 ,10:274. (SCI)
 

2014

18.

 H. K. Lin* and W. C. Hsu, “Electrode patterning of  ITO thin films by high repetition rate fiber  laser”, Applied Surface Science, 308, 2014, 58-62. (SCI)

17.

 H. K. Lin*, K. C. Cheng, T. P. Cho and J. C. Huang, “Properties of indium tin oxide/amorphousalloys bi-layer films as transparent electrodes”, Materials science Forum, Vols. 783-786, 2014, 1913-1919. (EI)

16.

 T. F. Hong, K. P. Chi, H. K. Lin*, Y. D. Wu, “Laser surface modification for rapidly oxide layer formation on Ti-6Al-4V”, Journal of Laser Micro/Nanoengineering, 9, 2014, 64-67. (SCI)

15.

 S. Y. Chang, H. K. Lin, L. C. Tsao, W. T. Huang and Y. T. Huang, “Effect of voltage on microstructure and corrosion resistance of microarc oxidation coatings on CP-Ti”, Corrosion Engineering, Science and Technology 49, 2014, 17-22. (SCI)

2013

14.

 H.K. Lin , S.M.Chiu, T.P.Cho and J.C.Huang“Improved bending fatigue behavior of flexible PET/ITO film with thin metallicglassinterlayer”, Materials Letters 113,2013,182-185. (SCI)

13.

 C.H. Li and H. K. Lin, “Effect of wavelength on patterning the electrode of cholesteric liquid crystal display”, Thin Solid Films 529, 2013, 222-225. (SCI)

2012

12.

 C. J. Lee, H. K. Lin*, C. H. Li, L. X. Chen, C. C. Lee, C. W. Wu and J. C. Huang, “A study on electric properties for pulse laser annealing of ITO film after wet etching”, Thin Solid Films 522, 2012, 330-335. (SCI)

11.

 H. Y. Chen, H. K. Lin*, C. C. Liang, J. Y. Su, D. L. Cheng, “Drive scheme for cholesteric liquid crystal display by pulsed laser”, Journal of Laser Micro/Nanoengineering, 7, 2012, 112-114. (SCI)

10.

 H. K. Lin, C. J. Lee, T. T. Hu, C. H. Li and J. C. Huang, “Pulsed laser micromachining of Mg–Cu–Gd bulk metallic glass ” Optics and Lasers in Engineering, 50, 2012, 883-886. (SCI)

9.

 L. H. Kao, H. K. Lin, F. J. Chuang, W. T. Hsu, “Electrospun Hierarchical Cancellous-Bone-Like Microstructures Composed of a Crystalline TiO2 Nanonet”, Mater. Letters 82, 2012, 64-66. (SCI)

8.

 C. L. Chuang, L. C. Tsao, H. K. Lin, L. P. Feng, “Effect of small amount of active Ti element additions on microstructure and property of Sn3.5Ag0.5Cu solder”, Mater. Sci. Eng. A, 2012, 478-484. (SCI)
 

2010-2011

7.

 H. H. Huang, H. K. Lin*, C. S. Chang, “The improvement on the electrical properties of ITO films on cholesteric liquid crystal layer by two-step process”, INEC, 2010, 997-998.

6.

 H. K. Lin*, Y. F. Huang, A. C. Chen and P. W. Liu, “Texture evolution of cholesteric liquid crystal driven by a thermal process”, Applied Surface Science, 257, 2011, 9858-9862. (SCI)

5.

  C. J. Lee, H. K. Lin, J. C. Huang, and S. Y. Kuan, “Tension behavior of free-standing amorphous film and amorphous-crystalline nanolaminates in submicron scale”, Scripta Mater., 65, 2011, 695-698. (SCI)

4.

 H. K. Lin*, C. H. Li and S. H. Liu, “Patterning electrode for cholesteric liquid-crystal display by pulsed laser ablation”, Optics and Lasers in Engineering, 48, 2010, 1008-1011. (SCI)

3.

 H. K. Lin*, R.C. Lin, and C.H. Li, “Etching Processes of Transparent Carbon Nanotube Thin Films Using Laser Technologies”, Thin Solid Films, 518, 2010, 7253-7257. (SCI)

2.

 K.S. Kao, D.L. Cheng, S.H. Chang, P.T. Hsieh, H.S. Chin, and H. K. Lin, “Effect of mesh patterning with UV pulsed-laser on optical and electrical properties of ZnO/Ag-Ti thin films”, Applied Surface Science, 256, 2010, 7446-7450. (SCI)

1.

 C. J. Lee, H. K. Lin*, S. Y. Sun, and J. C. Huang, “Characteristic difference between ITO/ZrCu and ITO/Ag bi-layer films as transparent electrodes deposited on PET substrate”, Applied Surface Science, 257, 2010, 239-243. (SCI)