學歷
國立中山大學材料科學研究所博士
經歷
| 英國伯恩茅斯大學 國立屏東科技大學 |
交換學者 副教務長兼綜合業務組組長 |
(2023/07~2023/08) (2022/08~迄今) |
| 國立屏東科技大學 | 教授 | (2018/08~迄今) |
| 英國南安普敦大學 | 交換學者 | (2017/07~2017/08) |
| 國立屏東科技大學 | 研發處研推組組長與技轉中心主任 | (2016/02~2016/07) |
| 國立屏東科技大學 | 副教授 | (2015/08~2018/07) |
| 國立屏東科技大學 | 助理教授 | (2012/02~2015/07) |
| 中國鋼鐵公司 | 工程師 | (2011/04~2012/02) |
| 工業技術研究院 | 研究員 | (2005/10~2011/04) |
| 美國南加州大學航太機械所 | 交換學者 | (2002/10~2004/01) |
期刊論文
24. H. K. Lin* and W. C. Hsu, “Electrode patterning of ITO thin films by high repetition rate fiber laser”, Applied Surface Science, 308, 2014, 58-62. (SCI)
23. H. K. Lin*, K. C. Cheng, T. P. Cho and J. C. Huang, “Properties of indium tin oxide/amorphousalloys bi-layer films as transparent electrodes”, Materials science Forum, Vols. 783-786, 2014, 1913-1919. (EI)
22. T. F. Hong, K. P. Chi, H. K. Lin*, Y. D. Wu, “Laser surface modification for rapidly oxide layer formation on Ti-6Al-4V”, Journal of Laser Micro/Nanoengineering, 9, 2014, 64-67. (SCI)
21. S. Y. Chang, H. K. Lin, L. C. Tsao, W. T. Huang and Y. T. Huang, “Effect of voltage on microstructure and corrosion resistance of microarc oxidation coatings on CP-Ti”, Corrosion Engineering, Science and Technology 49, 2014, 17-22. (SCI)
20. H.K. Lin , S.M.Chiu, T.P.Cho and J.C.Huang“Improved bending fatigue behavior of flexible PET/ITO film with thin metallic glass inter layer”, Materials Letters 113,2013,182-185. (SCI)
19. C.H. Li and H. K. Lin, “Effect of wavelength on patterning the electrode of cholesteric liquid crystal display”, Thin Solid Films 529, 2013, 222-225. (SCI)
18. C . J. Lee, H. K. Lin*, C. H. Li, L. X. Chen, C. C. Lee, C. W. Wu and J. C. Huang, “A study on electric properties for pulse laser annealing of ITO film after wet etching”, Thin Solid Films 522, 2012, 330-335. (SCI)
17. L. H. Kao, H. K. Lin, F. J. Chuang, W. T. Hsu, “Electrospun Hierarchical Cancellous-Bone-Like Microstructures Composed of a Crystalline TiO2 Nanonet”, Mater. Letters 82, 2012, 64-66. (SCI)
16. C. L. Chuang, L. C. Tsao, H. K. Lin, L. P. Feng, “Effect of small amount of active Ti element additions on microstructure and property of Sn3.5Ag0.5Cu solder”, Mater. Sci. Eng. A, 2012, 478-484. (SCI)
15. H. K. Lin, C. J. Lee, T. T. Hu, C. H. Li and J. C. Huang, “Pulsed laser micromachining of Mg–Cu–Gd bulk metallic glass ” Optics and Lasers in Engineering, 50, 2012, 883-886. (SCI)
14. H. Y. Chen, H. K. Lin*, C. C. Liang, J. Y. Su, D. L. Cheng, “Drive scheme for cholesteric liquid crystal display by pulsed laser”, Journal of Laser Micro/Nanoengineering, 7, 2012, 112-114. (SCI)
13. H. K. Lin*, Y. F. Huang, A. C. Chen and P. W. Liu, “Texture evolution of cholesteric liquid crystal driven by a thermal process”, Applied Surface Science, 257, 2011, 9858-9862. (SCI)
12. C. J. Lee, H. K. Lin, J. C. Huang, and S. Y. Kuan, “Tension behavior of free-standing amorphous film and amorphous-crystalline nanolaminates in submicron scale”, Scripta Mater., 65, 2011, 695-698. (SCI)
11. H. K. Lin*, C. H. Li and S. H. Liu, “Patterning electrode for cholesteric liquid-crystal display by pulsed laser ablation”, Optics and Lasers in Engineering, 48, 2010, 1008-1011. (SCI)
10. H. K. Lin*, R.C. Lin, and C.H. Li, “Etching Processes of Transparent Carbon Nanotube Thin Films Using Laser Technologies”, Thin Solid Films, 518, 2010, 7253-7257. (SCI)
9. C. J. Lee, H. K. Lin*, S. Y. Sun, and J. C. Huang, “Characteristic difference between ITO/ZrCu and ITO/Ag bi-layer films as transparent electrodes deposited on PET substrate”, Applied Surface Science, 257, 2010, 239-243. (SCI)
8. K.S. Kao, D.L. Cheng, S.H. Chang, P.T. Hsieh, H.S. Chin, and H. K. Lin, “Effect of mesh patterning with UV pulsed-laser on optical and electrical properties of ZnO/Ag-Ti thin films”, Applied Surface Science, 256, 2010, 7446-7450. (SCI)
7. H. H. Huang, H. K. Lin*, C. S. Chang, “The improvement on the electrical properties of ITO films on cholesteric liquid crystal layer by two-step process”, INEC, 2010, 997-998.
6. Y. N. Wang, C. I. Chang, C. J. Lee, H. K. Lin, and J. C. Huang, “Texture and weak Grain Size Dependence of Yield Stress in Friction Stir Processed Mg-Al-Zn Alloy”, Scripta Mater., 55, 2006, 637-640. (SCI)
5. H. K. Lin, J. C. Huang, T. G. Langdon, “Relationship between texture and low temperature superplasticity in AZ31 Mg alloy”, Mater. Sci. Eng. A, vol. A402, 2005, pp. 250-257. (SCI)
4. Y. N. Wang, C. J. Lee, C. C. Huang, H. K. Lin, and J. C. Huang, “Influence from Extrusion Parameters on High Strain Rate and Low Temperature Superplasticity of AZ Series Mg Base Alloys”, Materials Science Forum, vols. 426-432, 2003, pp. 2655-2660. (SCI)
3. H. K. Lin and J. C. Huang, “Fabrication of Low Temperature Superplastic AZ91 Mg Alloy Using Simple High-Extrusion-Ratio Extrusion Method”, Key Engineering Materials, vols. 233-236, 2003, pp. 875-880. (SCI)
2. H. K. Lin and J. C. Huang, “Fabrication of Low Temperature and High Strain Rate Superplasticity in AZ31 Mg Alloy Using Simple High-Extrusion-Ratio Extrusion Method”, Mater. Trans. JIM, vol. 43, No 10, 2002, pp. 2424-2432. (SCI)
1. S. F. Su, J. C. Huang, H. K. Lin, and N. J. Ho, “Electron Beam Welding on Mg-Al-Zn Base Alloys”, Metall. Mater. Trans., vol. 33A, 2002, pp. 1461-1473. (SCI)
研討會論文
29. C. J. Lee, H. K. Lin*, T. T. Hu, J. C. Huang, “Application of indium tin oxide/metallic glass bi-layer films as transparent electrodes deposition on PET substrate”, The 9th International Conference on Bulk Metallic Glasses (BMG IX), Xiamen, China, 2012, 173, (English oral)
28. H. K. Lin*, H. Y. Chen, J. Y. Su, C. C. Liang, C. S. Liu, “Addressing Cholesteric Liquid Crystal Display by Pulsed Laser”, Intl. Symp. On Robotics (ISR2010), Taipei, Taiwan, 2012, 881-885. (English oral)
27. 林鉉凱，李敬仁，李鈞函，徐維騁，黃志青, “脈衝雷射退火ITO在濕式蝕刻後之電性失效分析”, 2012材料年會, 雲林, 2012, P04-477.
26. M. W. Chang, H. K. Lin, C. H. Chiu, C. H. Li, M. C. Lin, B. J. Wen, and C. S. Chang, “Properties of patterned ITO film on plastic substrate under mechanical bending for flexible display”, IUMRS, 2011.
25. H. K. Lin, H. Y. Chen, C. C. Liang, J. Y. Su, D. L. Cheng, Y. C. Chang, “Driving cholesteric liquid crystal display by pulsed laser”, LPM 2011 International Symposium on Laser Precision Microfabrication, Takamatsu, 2011, p. 196.
24. H. K. Lin, C. J. Lee, T. T. Hu, C. H. Li, J. C. Huang, “Laser micromachining in Mg-Cu-Gd bulk metallic glass by pulsed laser”, LPM 2011 International Symposium on Laser Precision Microfabrication, Takamatsu, 2011, p. 224.
23. C. Y. Lin, D. L. Cheng, K. S. Kao, C. H. Liang, H. K. Lin, “Laser micromachining in Mg-Cu-Gd bulk metallic glass by pulsed laser”, LPM 2011 International Symposium on Laser Precision Microfabrication, Takamatsu, 2011, p. 239.
22. C. J. Lee, H. K. Lin, S. Y. Sun, C. C. Huang, “Characteristic difference between ITO/amorphous metal and ITO/crystalline metal bi-layer films as transparent electrodes deposited on PET substrate”, 2010材料年會, 高雄, 2010, p. 0276.
21. 張明偉，林鉉凱，黃璽豪，張忠恕，冉菁菁，林治民, “圖案化銦錫氧化導電膜於軟性基板之撓曲特性研究”, 2010材料年會, 高雄, 2010, p. 0298.
20. 李鈞函，林鉉凱，林茂吉, “雷射蝕刻電極圖案技術應用於膽固醇液晶顯示器”, 2010材料年會, 高雄, 2010, p. 0547.
19. C. C. Liang, S. C. Chen, H. Y. Chen, H. K. Lin, W. Y. Lee, J. Y. Su, “Photo colorization of single substrate flexible ChLC displays”, IMID/IDMC/ASIA Display, 2010, p.26.
18. H. K. Lin, C. H. Li, S. H. Liu, “Patterning electrode for cholesteric liquid-crystal display by laser ablation”, LPM 2010 International Symposium on Laser Precision Microfabrication, Germany, 2010, p. 5.
17. H. H. Huang, H. K. Lin, C. S. Chang, “The improvement on the electrical properties of ITO films on cholesteric liquid crystal layer by two-step process”, IEEE International NanoElectronics Conference, Hong Kong, 2010, FC455.
16. H. K. Lin, R. C. Lin, and C. H. Li, “Etching Processes of Transparent Carbon Nanotube Thin Films Using Laser Technologies”, TACT 2009 International Thin Films Conference, Taipei, 2009, p. 120.
15. H. Y. Chen, C. C. Liang, S. C. Liou, H. K. Lin, M. H. Hsieh, and J. Y. Su, “ Heat-assisted Laser-Addressing Based Electronic Paper“, ASID, Guangzhou, China, 2009, pp. 167-169.
14. 紀華峻，程達隆，林鉉凱，高國陞, 多層結構透明導電膜之開發 2009材料年會, 花蓮, 2009, p. 04-0605.
13. 李鈞函，林鉉凱，林瑞欽，黃璽豪，胡志明, 雷射蝕刻奈米碳管薄膜於軟性基板之研究 2009材料年會, 花蓮, 2009, p. 04-0129.
12. H. K. Lin, R.C. Lin, “Laser addressing in Cholesteric Liquid Crystal Display”, LAMP2009, Kobe, Japan, 2009, p.289.
11. H. K. Lin, D. L. Cheng, S. H. Liu, K. S. Kao, “Effects of substrate absorption on processing ITO film using DPSS and femtosecond laser”, LAMP2009, Kobe, Japan, 2009, p.179.
10. K. S. Kao, S. H. Chang, P. T. Hsieh, H. K. Lin and D. L. Cheng, “The Trade-off between Transmittance and Conductivity of TCO Mesh patterning with UV pulsed-laser”, LAMP2009, Kobe, Japan, 2009, p.176.
9. R. C. Lin, K. S. Kao, D. L. Cheng , and H.K. Lin, “Room Temperature Fabrication of Rutile TiO2 Nano Powder Using Laser Ablation” TOEO-6, Tokyo, Japan, 2009. p. P112.
8. C. C. Liang, S. C. Chen, H. K. Lin, C. S. Chang, and H. Y. Chen, “Roll-to-Roll Laser-addressing e-Papers” IDMC/3DSA Asia Display, Taipei, 2009, p. S24-04.
7. 張明偉, 林鉉凱, 陳學穎, 邱智新, 賴詩文, 田口方法於軟性顯示器電極圖案化製程之最佳化, 2008第六屆全國精密製造研討會論文集, 台南, 2008, p. 124.
6. 林鉉凱, 林瑞欽, 光驅動應用於膽固醇液晶軟式顯示器, 2008材料年會, 台北, 2008, p.P04-173.
5. H. Y. Chen, S. C. Lu, S. C. Chen, H. K. Lin, S. H. Liu, C. M. Chen, and C. C. Liang, “ Laser-addressing Electronic Paper“, IMID/IDMC/ASIA DISPLAY, Korea, 2008, pp. 175-178.
4. S. W. Lai, M. W. Chang, H. Y. Cheng, H. K. Lin and C. H. Chiu, “Optimization of ITO Laser Patterning in Flexible Display using Taguchi Method”, ISFED, Hsinchu, 2008, pp. 139-141.
3. 林瑞欽，高國陞，程達隆，林鉉凱，鄭建銓，陳英忠, 雷射處理應用於薄膜體聲波共振器, 2007材料年會, 新竹, 2007, p. P09-31.
2. H. K. Lin, Cheng Xu, Bing Q. Han, Enrique J. Lavernia and Terence G. Langdon, “ An Evaluation of Cavity Development in the Tensile Testing of Ultrafine-Grained Iron Processed by ECAP”, ,” Ultrafine Grained Materials III, (Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin and T.C. Lowe, eds.), 2004, pp. 523-528. The Minerals, Metals and Materials Society, Warrendale, PA.
1. H. K. Lin and J. C. Huang, “Influence from Texture on the Low temperature Superplasticity of AZ31 Mg processed by ECAP and Extrusion”, Proc. 2004 Annual Conf. of Chinese Society for Materials Science, Chinese Society for Materials Science, Tsinchu, 2004, p. PA2-12.
國內期刊
2. 林鉉凱, 林瑞欽, 雷射技術於膽固醇液晶顯示器之應用, 機械工業雜誌, 315期, 2009, pp 21-29.
1. 林鉉凱, 劉松河, 程達隆, 軟式顯示器電極圖案技術, 科儀新知, vol. 29, 2008, pp. 44-49.
專利
8. H. K. Lin and J. C. Huang, “Using Simple High Extrusion Ratio in Fabrication Low Temperature Superplasticity in AZ91 Mg Base Alloy”, approved by ROC patent, 2003, patent no: Invention 533002.
7. H. K. Lin and J. C. Huang, “Fabrication and Press Forming of Low Temperature and High Strain Rate Superplasticity in AZ31 Mg Base Alloy”, approved by ROC patent, 2003, patent no: 528621.
6. 程達隆、吳信賢、蔡振凱、林鉉凱,”一種使用雷射干涉技術量測薄膜厚度之裝置”, 中華民國專利發明, 2007, 第I 290614號
5. 陳英忠、林瑞欽、高國陞、程達隆、林鉉凱、 劉松河、鄭建銓, “薄膜體聲波共振器之製造方法,” 中華民國專利發明, 2008, 申請案號：096150406.
4. 程達隆、陳憲軍、高國陞、林瑞欽、王志明、林鉉凱“染料敏化太陽能電池封裝結構” 中華民國專利發明, 2008, 申請案號：097147845
3. 高國陞, 程達隆, 歐淑玲, 林鉉凱, “具有溫熱功能的奶瓶,” 中華民國專利發明, 申請案號：097143024.
2. 林鉉凱、陳上佳、陳桓殷、呂紹銓、李炫璋, “顯示系統及液晶的驅動方法”, 中華民國專利發明, 2008, 申請案號：097148459
1. 程達隆、陳憲軍、高國陞、林鉉凱、梁家華、蔡振凱, “發光二極體”, 中華民國專利發明, 2009, 申請案號：098112023